Need Emergency Services ?
Call: (877) 631-7576
Get A Quote

Leave Fire Damage Restoration in Fort Worth, TX to Mr. Restore

According to the National Fire Protection Agency of the United States, almost 400,000 fires happened annually between 2011 and 2015. That is a startling statistic and one which is really troublesome to those living in warm areas plagued by forest fires. Sometimes, there’s just nothing you can do to stop fires and you have to resort to picking up the pieces when the damage is done. However, you can make that process much easier by calling the right people for fire damage restoration in Fort Worth, TX. That’s us; Mr. Restore. We have over a half a century of experience mitigating and restoring damage done by fire. We understand how crucial it is to act swiftly when fire strikes. Even after it is put out, residual damage has to be nipped in the bud so that further damage doesn’t follow. These crucial repairs and replacements need to be made quickly so that damage in one part of the home doesn’t spread to the other. Our trained professionals are equipped with years of wisdom and experience in fire restoration and can get to work right away.

Different Types of Fire

A house fire is always bad, however it depends how it started and how long it went on to assess the damages. Usually fires which involve chemicals and greases are considered worse than say a candle. Fire damage restoration in Fort Worth, TX is especially tricky if grease fires are involved. In fact, there are six types of fire damages that you can deal with. And we have the proper protocols to address them all.

Class A

This refers to fires that occur as a result of flammable solids, including paper, wood, cloth, plastics, etc. These are the most common types of fires that can occur in a home when curtains, clothes, appliances or mattresses can catch on fire. This type of fire can be aggravated if it occurs in a small room or storage room with many surrounding objects.

Class B

This refers to fire caused by liquefied solids or liquids. This can include melted wax, petroleum jelly, kerosene, gasoline and paints, etc. To prevent class B fire, keep flammable liquids and solids in a metal cabinet or a fire-resistant cabinet. Usually fire damage restoration in Fort Worth, TX is the hardest when dealing with these sorts of fires.

Class C

C type fires are caused by gaseous substances, such as natural gas and cooking gas that is found in homes. Exploding stoves and gas leaks are typically the main causes of these types of fires. Butane, propane, methane, hydrogen and other types of gases can cause class C fires. These are usually extremely explosive and can result in huge explosions if not put out quickly. This type of fire can cause substantial monetary damages and thus its fire damage restoration in Fort Worth, TX, is more extensive.

Class D

These are fires caused by combustible metals like sodium, magnesium, potassium, etc. These metals are extremely reactive to the air and in some cases need to be stored in oil just to stop reacting with oxygen. Even when placed in water, these metals undergo reactions that start fires. Hence, it is very important to isolate them from the atmosphere and keep them as far away from fire as possible.

Class E

This is a combination of fires caused by class A and B along with electrical damage. Think blown fuses, overloaded circuits or damaged electrical circuits causing sparking and causing fires. The basement can be used for storage and placing housing electrical panels and fuse boxes so that makes a deadly combination. A key part of fire damage restoration in Fort Worth, TX is also fire prevention, and this is the most basic thing you can do.

Class F

This type of fire again goes back to the kitchen and focuses on greases, oils and fats causing fires. The presence of oily rags, spills, improper cleanup and improper storage of oils around the house can cause these fires. It just takes a random spark or an improperly put out match to get the blaze going. And since these fats are made for cooking, they spread fire uncommonly fast. They also cause more severe burns to the skin than waxes and gasoline since they burn at higher temperatures. A bit of common sense and care can prevent these fires.

Different Types of Damages

There are also many different types of fire damages that can occur. These are related to direct and indirect types of damages that occur. For instance, primary fire damage results due to the heat and corrosion directly from the flames of the fire. This results in burnt furniture, burnt infrastructure, etc. Fire damage restoration in Fort Worth, must be done quickly to avoid further damage to any other parts of the building or the home. On the other hand, secondary fire damage occurs due to the substances made corrosive by the fire and the smoke from the fire. Secondary damage has a tendency to create a positive feedback loop too. For instance, it can cause damages that can feed the fire and so on and so forth. An example is that of a windy day that forces the fire to spread faster than before, causing it to get bigger and thus causing fumes that can create localized climate that pushes it even further. This makes fire damage restoration in Fort Worth, TX much more difficult. Fire damage restoration in Fort Worth, TX can be a daunting task and especially with the emotional and physical damage that a fire leaves, the situation can seem very bleak. However, since Mr. Restore has dealt with all kinds of damages in the past, we’ll give you the best help that is possible. For the best fire restoration in Fort Worth, TX contract Mr. Restore immediately. Our trained professionals are waiting patiently for your call.

WEBSITE & SEO by NATIVERANK